Calibrators

Exact Pressure Measurement and Monitoring are Must in Applications Crucial to Operational Safety of Machinery and Industrial Installations. Regular Inspection of the Pressure gauges / sensor / transmitters / indicators Used in these Applications is Absolutely Essential for Economic and Technical - Safety Reasons and is Already Prescribed as Obligatory in Many Sectors.

Description:

“SANSEL” PCAL 1300 / 350 is a Micro controller based precision pressure calibrators generates true reference pressure. Connect the gauge to be calibrated in the calibrator. Set the pressure using respective pump when stabilization.

Applications in

• Energy - Production and Energy -Distribution Sectors
• Glass, Ceramic, Semi Conductor Industries
• Steel Material Processing Industries
• Calibrators laboratories etc,

Specifications:

• MODEL : Pcal 1300/350 bar
• Range (bar) : 0 to 350 bar
• Pressure media : Oil & Water
• Pressure pump : HP-02A
• Display : 128 x 64 COG Graphic LCD with White LED Back light
• Pressure Port : 2x 1/2" BSP Female
• Pump dimension in mm (Appox.) : 310 x 80 x 165 (LxHxw)
• Resolution (bar) : 6 digit user selectable
• Instrument Port : 1/4 BSP Male x 10 mm long
• Instrument dimension : 100 x 100 55 (W x H x D) mm
• Instrument Weight : 400gms (Appox.)
• Stability time : 1 to 2 mins
• Accuracy : ±0.05%FS
• Pressure units (selectable) : bar, mbar, Mpa, kpa, kg/cm2,inHg,cmHg,mmHg,mH₂o, ftH₂o,inH₂o, cmH₂o,mmH₂o
• Pressure Zero : One touch zero provided on front key
• Pressure Peak : Maximum &minimum with user reset option
• Pressure overflow : FS X 2 (Max.)
• Pressure burst : FS X 3 (Max.)
• Temp.Measure : RTD-PT 100 (2,3,4, wire selectable)
• Pressure overflow : FS X 2 (Max.)
• Pressure burst : FS X3 (Max.)
• Temp.Measure : RTD-PT 100 (2,3,4, wire selectable)
• Temp. Range : -199.999 to 850.000
• Switch test : Provided
• mA Measure : 0-24 mA (scalable)
• Display scale : -99999 to 99999 counts (for mA measure input)
• Display Hold : One touch hold provided on front key
• Power Supply : 9V DC ±5% / 200mAh Rechargeable battery with battery life 4hours
• with out back light(or) 9V DC adapter /230V AC supply operated
• Pump Weight (gms)(Approx.) : 700
• Pc Interface : RS 485
• Pc Software : Windows based semi automatic calibration software (optional)

SANSEL Model TCAL 1401 / -30 Dry well Temperature calibrator are high performance for industrial atmosphere and covering temperature range from -30* to 100°C. Which are ideally suited onsite calibration of thermocouple, RTDs, Indicator with sensors & 4-20mA signal transmitter with indicator in Food, Pharmaceutical and all types of process industries. Having it's advantage of user friendly, light weight, portable, fast settling, better uniformity and accuracy over a wide temperature range. TCAL 1401 / -30 having interchangeable inserts to suit for calibration of different diameter of sensors (upto 22mm). Additional Inserts (optional) with special drillings are available to order.

Specifications:

• Model: TCAL 1401/ - 30
• Display: 0.58” (15mm)(Block) / 0.3”(7.8mm) (Set) 4 digit LCD Display with 4 keys
• Temperature Range: -30 to 100°C (*@Ambient 25°C)
• Radial Uniformity: Better than 0.15°C
• Resolution: 0.1°C
• Stability: ± 0.1°C
• Temperature readout: °C
• Heating time: 20 mins (Amb. To 100 °C)
• Cooling time: 25 mins (25 to -30 °C)
• Stabilization time: 10 minutes
• Well Dimension (dia. X height): 22 x 120 mm
• Standard well holes in mm: 5.2, 6.2 & 6.2
• Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC)
• Power consumption: 500 VA
• Overall Dimension in mm: 490 x 178 x 357 (L x B x H)(Approx.)
• Instrument Weight: 12.5 kg (without well insert) (Approx.)

The RPMC 1700 Series is high precision Tachometer calibrator, generates true reference rotation per minute (RPM). This calibrator uses “German technology” with high speed motor, high precision encoder and adoption of a new power full 32 bit CPU in control drive, featuring automated gain tuning function, stability, stable stop, rugged in use and many more.

Due to it’s light weight and rugged Aluminium enclosure, it is suitable for in-house and on-site calibration of contact / non contact Tachometer, Tacho coil, Tacho generator, RPM indicator, RPM transmitter, Speedo meter, Proximity sensor, Stroboscope, etc.,.

Features:

• 7” True colour TFT display with Touch screen


• Low noise


• Quick settling time


• Better stability


• Any odd value is settable for both contact & Non - contact RPM


• High resolution


• Ultra stable motor with high precision encoder and drive


• Direct drive shaft (there is no gear)


• Compact size

Specifications:

• Model : RPMC 1700 - 4A


• Control Range :Contact : 0 to 10000 RPM Non Contact : 0 to 1,70,000 RPM


• Resolution : 0.01 RPM


• Display Stability : Contact : ± 0.02 RPM, Non Contact : ± 0.2 RPM


• Stability : Contact : ± 0.1 RPM, Non Contact : ± 2 RPM


• Accuracy : Contact : ± 0.5 RPM, Non Contact : ± 5 RPM


• Display : 7” True colour TFT LCD Display with Touch screen


• Stability Time : Within 5 seconds


• Noise level : < 50dB


• Motor : Ultra stable motor with high resolution Encoder & Drive


• Power supply : 230V AC ± 10% / 50Hz (Optional 110V AC)


• Power Consumption : 750 VA


• Outer Enclosure Construction : Aluminium (powder coated)


• Overall Dimension : 330mm L x 440mm W x 256mm H (Approx.)


• Instrument Weight :22.5 kg (Approx.) 

Exact Pressure Measurement and Monitoring are Must in Applications Crucial to Operational Safety of Machinery and Industrial Installations. Regular Inspection of the Pressure gauges / sensor / transmitters / indicators Used in these Applications is Absolutely Essential for Economic and Technical - Safety Reasons and is Already Prescribed as Obligatory in Many Sectors

Description:

“SANSEL” PCAL 1300 / 2 is a Micro controller based precision pressure calibrators generates true reference pressure. Connect the gauge to be calibrated in the calibrator. Set the pressure using respective pump when stabilization.

Specifications:

• MODEL : Pcal 1300/2 bar
• Range (bar) : -0.9 to 2 bar
• Pressure media : Air
• Pressure pump : HP-04 ,HP-03
• Display : 128 x 64 COG Graphic LCD with White LED Back light
• Pressure Port : 2 x1/4 " BSP Female
• Pump dimension in mm (Appox.) : 170 x 45 (Height x Dia)
• Resolution (bar) : 6 digit user selectable
• Instrument Port : 1/4 BSP Male x 10 mm long
• Instrument dimension : 100 x 100 x 55 (W x H x D) mm
• Instrument Weight : 400gms (Appox.)
• Stability time : 1 to 2 mins
• Accuracy : ±0.05%FS
• Pressure units (selectable) : bar, mbar, Mpa, kpa, kg/cm2, inHg, cmHg,mmHg,mH₂o, ftH₂o,inH₂o, cmH₂o,mmH₂o
• Pressure Zero : One touch zero provided on front key
• Pressure Peak : Maximum &minimum with user reset option
• Pressure overflow : FS X 2 (Max.)
• Pressure burst : FS X 3 (Max.)
• Temp.Measure : RTD-PT 100 (2,3,4, wire selectable)
• Temp. Range : -199.999 to 850.000
• Switch test : Provided
• mA Measure : 0-24 mA (scalable)
• Display scale : -99999 to 99999 counts (for mA measure input)
• Display Hold : One touch hold provided on front key
• Power Supply : 9V DC ±5% / 200mAh Rechargeable battery with battery life 4hours
• with out back light(or) 9V DC adapter /230V AC supply operated
• Pump Weight (gms)(Approx.) : 700
• Pc Interface : RS 485
• Pc Software : Windows based semi automatic calibration software (optional)

Exact Pressure Measurement and Monitoring are Must in Applications Crucial to Operational Safety of Machinery and Industrial Installations. Regular Inspection of the Pressure gauges / sensor / transmitters / indicators Used in these Applications is Absolutely Essential for Economic and Technical - Safety Reasons and is Already Prescribed as Obligatory in Many Sectors

Description:

“SANSEL” PCAL 1300 / 0.350 mbar is a Micro controller based precision pressure calibrators generates true reference pressure. Connect the gauge to be calibrated in the calibrator. Set the pressure using respective pump when stabilization.

Specifications:

• MODEL : Pcal 1300/±350mbar


• Range (bar) : ±350 mbar


• Pressure media : Air


• Pressure pump : HP-04


• Display : 128 x 64 COG Graphic LCD with White LED Back light


• Pressure Port : 2 x 1/4" BSP Female


• Pump dimension in mm (Appox.) : 170 x 45 (Height x Dia)


• Resolution (bar) : 6 digit user selectable


• Instrument Port : 1/4 BSP Male x 10 mm long


• Instrument dimension : 100 x 100 x 55 (W x H x D) mm


• Instrument Weight : 400gms (Appox.)


• Stability time : 1 to 2 mins


• Accuracy : ±0.05%FS


• Pressure units* (selectable) :bar, mbar, Mpa, kpa, kg/cm2,inHg,cmHg,mmHg,mH₂o, ftH₂o,inH₂o, cmH₂o,mmH₂o


• Pressure Zero : One touch zero provided on front key


• Pressure Peak : Maximum &minimum with user reset option


• Pressure overflow : FS X 2 (Max.)


• Pressure burst : FS X 3 (Max.)


• Temp.Measure : RTD-PT 100 (2,3,4, wire selectable)


• Pressure overflow : FS X 2 (Max.)


• Pressure burst : FS X3 (Max.)


• Temp.Measure : RTD-PT 100 (2,3,4, wire selectable)


• Temp. Range : -199.999 to 850.000


• Switch test : Provided


• mA Measure : 0-24 mA (scalable)


• Display scale : -99999 to 99999 counts (for mA measure input)


• Display Hold : One touch hold provided on front key


• Power Supply : 9V DC ±5% / 200mAh Rechargeable battery with battery life 4hours


• with out back light(or) 9V DC adapter /230V AC supply operated


• Pump Weight (gms)(Approx.) : 700


• Pc Interface : RS 485


• Pc Software : Windows based semi automatic calibration software (optional)

Exact Pressure Measurement and Monitoring are Must in Applications Crucial to Operational Safety of Machinery and Industrial Installations. Regular Inspection of the Pressure gauges / sensor / transmitters / indicators Used in these Applications is Absolutely Essential for Economic and Technical - Safety Reasons and is Already Prescribed as Obligatory in Many Sectors

Description:

“SANSEL” PCAL 1300 / 20 is a Micro controller based precision pressure calibrators generates true reference pressure. Connect the gauge to be calibrated in the calibrator. Set the pressure using respective pump when stabilization.

Features:

1. High accuracy


2. 6 digit user selectable resolution


3. PT-100 temperature measurement of -200 to 800°C @ 0.001°C resolution


4. Windows base software (optional)


5. User selectable pressure units

Specifications:

• Model : Pcal 1300 / 20 bar


• Display : 128 x 64 COG Graphic LCD with White LED Back light


• Range (bar) : -1 to 20 bar


• Accuracy : ± 0.05%FS


• Resolution (bar) : 6 digit user selectable


• Instrument Port : 1/4" BSP Male x 10 mm long


• Instrument dimension : 100 x 100 x 55 (WxHxD) mm


• Instrument Weight : 400gms (Appox.)


• Stability time : 1 to 2 mins


• Pressure units* (selectable) :bar, mbar, Mpa, kpa, kg/cm2, inHg,cmHg,mmHg,mH₂o, ftH₂o,inH₂o, cmH₂o,mmH₂o


• Pressure Zero : One touch zero provided on front key


• Pressure Peak : Maximum &minimum with user reset option


• Pressure overflow : FS X 2 (Max.)


• Pressure burst : FS X3 (Max.)


• Temp.Measure : RTD-PT 100 (2,3,4, wire selectable)


• Temp. Range : -199.999 to 850.000


• Switch test : Provided


• mA Measure : 0-24 mA (scalable)


• Display scale : -99999 to 99999 counts (for mA measure input)


• Display Hold : One touch hold provided on front key


• Power Supply : 9V DC ±5% / 200mAh Rechargeable battery with battery life 4hours


• with out back light(or) 9V DC adapter /230V AC supply operated


• Pump Weight (gms)(Approx.) : 700


• Pc Interface : RS 485


• Pc Software : Windows based semi automatic calibration software (optional)

Exact Pressure Measurement and Monitoring are Must in Applications Crucial to Operational Safety of Machinery and Industrial Installations. Regular Inspection of the Pressure gauges / sensor / transmitters / indicators Used in these Applications is Absolutely Essential for Economic and Technical - Safety Reasons and is Already Prescribed as Obligatory in Many Sectors.

Description:

“SANSEL” PCAL 1300 / 1000 is a Micro controller based precision pressure calibrators generates true reference pressure. Connect the gauge to be calibrated in the calibrator. Set the pressure using respective pump when stabilization.

Applications in

Energy - Production and Energy -Distribution Sectors

Glass, Ceramic, Semi Conductor Industries

Steel Material Processing Industries

Calibrators laboratories etc,

Specifications:

• MODEL : Pcal 1300/1000 bar
• Range (bar) : 0- 1000 bar
• Pressure media : oil & Water 
• Pressure pump : HP-01
• Display : 128 x 64 COG Graphic LCD with White LED Back light
• Pressure Port : 2 x 1/2" BSP Female
• Pump dimension in mm (Appox.) : 340 x240 x320(L xH xW)
• Resolution (bar) : 6 digit user selectable
• Instrument Port : 1/4 BSP Male x 10 mm long
• Instrument dimension : 100 x 100 x 55 (W x H x D) mm
• Instrument Weight : 400gms (Appox.)
• Stability time : 1 to 2 mins
• Accuracy : ±0.05%FS
• Temp. Range : -199.999 to 850.000
• Switch test : Provided
• mA Measure : 0-24 mA (scalable)
• Display scale : -99999 to 99999 counts (for mA measure input)
• Display Hold : One touch hold provided on front key
• Power Supply : 9V DC ±5% / 200mAh Rechargeable battery with battery life 4hours
• with out back light(or) 9V DC adapter /230V AC supply operated
• Pump Weight (gms)(Approx.) : 7500
• Pc Interface : RS 485
• Pc Software : Windows based semi automatic calibration software (optional)

SANSEL Model HCAL 1104U – v2 Humidity and Temperature Generator is to perform a rapid & easy calibration of portable instruments, sensors, Transmitter and data logger of different manufacturers. Solid state Heating & Cooling technology with high performance humidification system, generate precision chamber stability & uniformity gradient range from 5 to 60°C(Temp.) / 5 to 95 % RH*(Humd.) / -25 to 40°C(Dew point)

Features

• 7” True colour TFT display with Touch screen
• Control range from 5 to 60°C(Temp.) / 5 to 95 % RH (Humd.)/-25 to 40°C(Dew point)
• Semi Portable & Rugged
• High Resolution 0.01 °C / %RH
• Stability better than ± 0.05°C / 0.2 % RH
• Better uniformity ± 0.2°C / 0.3 % RH
• Fast raising & quick settling
• Improved design to provide better thermal performance in term of control stability & temperature gradients
• Inter changeable front door to suit different manufacturer’s indicator, sensor, transmitters

Accessories

• Basic Instrument
• External Humidifier system-weight 6kg(approx.)
• Desiccant cells – 2nos
• Molecular sieve Desiccant – 2kg
• Interchangeable Acrylic door (plain)
• Spare fuses
• Instruction manual
• Mains card
• Traceable calibration certificate

Optional

• Precision Portable Hygrometer with sensor – Model : HTD 200
• Additional Molecular sieve Desiccant
• Additional Interchangeable Acrylic door (custom special holes)
• Carrying case

SANSEL Model BCAL 40, Black body Calibrator is used to measure the accuracy and performance of non-contact fever detection systems, like medical thermometer & image scanner. Now it is being used in relation to COVID-19 (corona virus). This Blackbody Source meets the demand for a simple cost effective solution but high accurate device for the calibration of thermal imager and IR thermometers that are used at temperature around that of the human body.

Unlike Heat only devices, This model uses a solid state Heat & cool Technology, so that this can be generate both Heat and Cool. This having benefits to maintain the block temperature in different ambient temperature.

BCAL 40 using True colour 3.5” Touch screen display, easy to read multi parameter at the same time like Block temperature, Set temperature, Control status, Output % level, range of the equipment, displays both °C & °F and two Touch screen soft keys are used for settings and one more advantage of help menu to guide the operating Instruction of the equipment. Hence no need of hard copy of Instruction manual.

Specifications:

• Model: BCAL 40
• Display: 3.5 inch True TFT LCD Display with Touch screen
• Temperature Range: Body mode: 20 to 50°C / 68 to 122°F,  Surface mode: 0 to 100°C / 32 to 212°F
• Resolution : 0.01°C
• Stability: ± 0.03°C
• Uniformity: ± 0.3°C
• Stabilization Time: 10 minutes
• Temperature readout: °C & °F at a time
• Heating time: 10 mins (Amb. To 50°C )
• Power supply: 90 to 260V AC/DC / 50/60Hz
• Power Consumption: Less than 100 VA
• Aperture area: 25mm
• Emissivity: 0.950
• Overall Dimension: 210 x 210 x 140 (L x B x H)(Approx.)
• Instrument Weight: 3.7 kg

• MODEL BCAL : 502
• Display : 4+4 digit 7 segment LED Display
• Temperature Range : 50 to 500 °C
• Resolution : 0.1°C
• Stability : ± 0.2 °C
• Uniformity in aperture area: ± 0.5°C@50°C, ± 1.7@250°C , ± 2.5@500°C
• Heating Time (to Max) : 40 Minutes
• Cooling  Time (to Max) : 40 Minutes to 100°C
• Aperture area : 25 mm
• Emissivity : 0.950
• Power Supply : 230V AC ± 10% / 50Hz (Optional 110V AC)
• Power Consumption : 500 VA
• Instrument Weight : 4.5 kg

• Model TCAL 1404/-15
• Display 2.8" True TFT with Touch screen
• Temperature Range -15 to 120 °C
• Radial uniformity (Better than) ±0.03°C
• Resolution 0.01 °C
• Stability ±0.03 °C
• Temperature readout °C
• Heating time Amb to 120-->25 min, -15 to Amb -->5 min
• Cooling time Amb to -15 -->20 min, 120 to 50 -->8 min
• Stabilization time 10 mins
• Well Dimension(dia. x height) 20 x 90 mm
• Well immersion depth 90 mm (throw hole)
• Standard well holes in mm 6.5 x 2nos
• Power supply 80 to 264VAC / 113 to 370VDC / 47 to 63Hz
• Power consumption 100 w
• Overall Dimension in mm 170 x 95 x 183 mm
• Instrument Weight 3.5 Kg

It is one of the smallest dry block with rich features and is highly competitive in price. SANSEL Model TCAL 1404/-5, (Dry Block Miniature Temperature Calibrator) sets a new benchmark in temperature calibration with advanced features that deliver unmatched precision, ease of use, and operational stability. Temperature range of the TCAL 1404 /-5 covers from -5 to 100 C. Our Drywell Calibrators are ideally suited for fast calibration in process industries to calibrate Thermocouple, RTD, Indicator with sensors & transmitters with sensors, this compact yet powerful calibrator is designed to meet the stringent demands of today™s laboratories and field operations.

Specifications

Model: TCAL 1404/-5

Display: 2.8" True TFT with Touch screen 

Temperature Range:  -5 to 100C

Radial uniformity: (Better than) �0.03C

Resolution: 0.01 C

Stability: �0.03 C

Temperature  readout: C

Heating time: 

Amb to 100-->15min

-5 to Amb -->3 min

Cooling time:

Amb to -5 -->15min, 

100 to 50-->4 min

Stabilization time: 10 mins

Well Dimension(dia. x height): 20 x 90 mm

Well immersion depth: 90 mm (throw hole)

Standard well holes in mm: 6.5 x 2nos

Power supply: 80 to 264VAC / 113 to 370VDC / 47 to 63Hz

Power consumption: 100 w

Overall Dimension in mm: 170 x 95 x 183 mm 

Instrument Weight: 3.5 Kg

• Measurement Range: 0-1 m/s & 197 fpm, 0-2 m/s & 394 fpm, 0-5 m/s & 984 fpm, 0-10 m/s & 1967 fpm, 0-20 m/s & 3937 fpm (any once factory Presettable)
• Resolution: 0.01 m/s & 1 fpm
• Accuracy: ± 5% of Full Scale
• Display: 2.8” True Colour TFT with Touch Screen
• Application Environment Range: -10 to 60 °C ; 0 to 100% RH (non condensed)
• Storage Environment Range: -10 to 45 °C ; 10 to 90% RH
• Display Refresh Rate: 1 second (typical)
• Data Logging Interval: 1 sec to 24 Hours (user selectable)
• Data download: Via USB type-C to PC software (Sansel-Soft-01)
• Alarm: Audible & Visible, user-settable high & low alarms
• Calibration: 2 point Calibration feature available
• Touch sound: On / Off option available
• Battery charging port: USB C-type
• Backlight Time Interval: Adjustable from OFF to 59 mins : 59 secs
• Brightness adjustment: 10% to 100% (user adjustable)
• Integrated battery: 3.7 V / 10,000 mAh rechargeable Li-ion battery
• Housing Material: ABS with anti-slip grip silicon cover
• Protection Class: IP40
• Dimension ( L x B x H): 35 x 80 x 165 mm
• Instrument Weight: 560 g (Approx.)

• Measurement Range:
  Dew Point (Dp): -8 °C to +20 °C
  Relative Humidity (RH): 0% to 100%RH
  Temperature (T): -20 °C to +70 °C
• Resolution : 0.01 °C / % RH
• Accuracy: ± 1 °C at 50…-20 °Ctd
  ± 2 °C at -20…-50 °Ctd
  ± 3 °C at -50…-80 °Ctd
• Display: 2.8” True Colour TFT with Touch Screen
• Sensor Supply Output: 15 V DC
• Display Refresh Rate: 1 second (typical)
• Data download: Via USB C-type to PC software (Sansel-Soft-01)
• Alarm: Audible & Visible, user-settable high & low alarms for all parameters
• Calibration (1 to 5 points each parameter): Multipoint Calibration for temperature & humidity
• Touch sound: On / Off option available
• Integrated battery: 3.7 V / 10,000 mAh Inbuilt rechargeable Li-ion battery
• Battery charging port: USB C-type
• Backlight Time Interval: Adjustable from OFF to 59 mins : 59 secs
• Application Environment Range: -1 °C to +60 °C; 0% to 100% RH (non-condensed)
• Storage Environment Range: -10 to 45 °C ; 10 to 90% RH
• Housing Material: ABS with anti-slip grip silicon cover
• Protection Class: IP40
• Dimension ( L x B x H): 35 x 80 x 165 mm
• Weight: Approximately 560 g

• Measurement Range:
  Temperature (T): -20 to +100 °C
  Relative Saturation (RS): 0 to 100% RS
  Water Activity (aw): 0 to 1 aw
• Resolution : 0.01 °C / % RS & 1 aw
• Accuracy:
  aw (0...0.9 aw): ±0.02 aw at 23 °C
  aw (0...1.0 aw): Typically ±0.03 aw at 23 °C
  Temperature: ±0.3 °C
• Display: 2.8” True Colour TFT with Touch Screen
• Display Refresh Rate: 1 second (typical)
• Data Logging Interval: 1 sec to 24 Hours (user selectable)
• Data download: Via USB type-C to PC software (Sansel-Soft-01)
• Alarm: Audible & Visible, user-settable high & low alarms for all parameters
• Calibration: 2 point calibration for both temperature and humidity
• Touch sound: On / Off option available
• Integrated battery: 3.7 V / 10,000 mAh rechargeable polymer Li-ion battery
• Battery charging port: USB C-type
• Backlight Time Interval: Adjustable from 0(OFF) to 59 minutes and 59 seconds
• Brightness adjustment: 10% to 100% (user adjustable)
• Application Environment Range:
  -Temperature: -10°C to 60°C;
  -Humidity: 0% to 100% RH (non-condensed)
• Storage Environment Range:
  -Temperature: -10 to 45 °C ;
  -Humidity: 10 to 90% RH
• Housing Material: ABS with anti-slip grip silicon cover
• Protection Class: IP40
• Dimension ( L x B x H): 35 x 80 x 165 mm
• Instrument Weight: 560 g (Approx.)

• Model : HCAL 1104U – v2
• Display: 7” True colour TFT LCD Display with Touch screen
• Control Range : 5 to 60°C / 3 to 95 % RH*
• Dew point Temperature range (psychometric calculated) : -30°C to 45°C
• Psychometric calculated indication : Dew / Frost point ( Dp / Fp )
  Wet Bulb Temperature ( Tw )
  Vapour partial pressure ( E )
  Vapour Saturation pressure ( Ew )
  Mixing ratio by weight (dry) ( g / kg )
  Enthalpy ( H ) ( KJ / kg )
  Specific Humidity (moisture) ( g / kg )
  Absolute Humidity (moisture) ( g / m³ )
  Volume mixing ratio (dry) ( ppm )
• Calculation method : WMO method
• Resolution : 0.01 °C / 0.01% RH
• Display stability : Better than ± 0.03 °C / ± 0.15% RH
• Chamber stability @25°C **
  Temperature: ± 0.1°C,  Humidity: ± 0.3 % RH
• Chamber Uniformity @25°C**
  Temperature: ± 0.2°C, Humidity: ± 0.5 % RH
• Test sensor insert port: Inter changeable Acrylic door is provided on front side of the chamber with pg21 gland (cable or sensor size range from 13 to 18mm) x 3nos
• External Humidifier Water tank capacity: 6 litres (approx.)(NOTE : 3 liter filling is enough for our application)
• Humidifier Liquid: Distilled water
• Humidifying Time:2 %RH / sec (50 to 90 % RH)
• Dehumidifying Time: 6 %RH / sec (50 to 10 % RH)
• Test chamber area: 230mm DIA x 170mm D (Approx)
• Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC)
• Power Consumption: 1000 VA
• Construction: Inner chamber SS 310 / outer MS powder coating
• Overall Dimension: 436mm L x 676mm W x 368mm H (Approx.)
• Weight: 44 kg (without Accessories) + 6 kg (standard accessories) (Approx.)

Exact Pressure Measurement and Monitoring are Must in Applications Crucial to Operational Safety of Machinery and Industrial Installations. Regular Inspection of the Pressure gauges / sensor / transmitters / indicators Used in these Applications is Absolutely Essential for Economic and Technical - Safety Reasons and is Already Prescribed as Obligatory in Many Sectors.

Description:

“SANSEL” PCAL 1300 / 700 is a Micro controller based precision pressure calibrators generates true reference pressure. Connect the gauge to be calibrated in the calibrator. Set the pressure using respective pump when stabilization.

Applications in

Energy - Production and Energy -Distribution Sectors

Glass, Ceramic, Semi Conductor Industries

Steel Material Processing Industries

Calibrators laboratories etc,

Specifications:

• MODEL : Pcal 1300/700bar
• Range (bar) : 0 - 700 bar
• Pressure media : oil & Water 
• Pressure pump : HP-01
• Display : 128 x 64 COG Graphic LCD with White LED Back light
• Pressure Port : 2 x 1/2" BSP Female
• Pump dimension in mm (Approx.) : 340 x 240 x 320 (LxHxW)
• Resolution (bar) : 6 digit user selectable
• Instrument Port : 1/4 BSP Male x 10 mm long
• Instrument dimension : 100 x 100 x 55 (W x H x D) mm
• Instrument Weight : 400gms (Approx.)
• Stability time : 1 to 2 mins
• Accuracy : ±0.05%FS
• Pressure units* (selectable) : bar, mbar, Mpa, kpa, kg/cm2, inHg, cmHg, mmHg, mH₂o, ftH₂o, inH₂o, cmH₂o, mmH₂o
• Pressure Zero : One touch zero provided on front key
• Pressure Peak : Maximum & minimum with user reset option
• Pressure overflow : FS X 2 (Max.)
• Pressure burst : FS X 3 (Max.)
• Temp.Measure : RTD-PT 100 (2,3,4, wire selectable)
• Temp. Range : -199.999 to 850.000
• Switch test : Provided
• mA Measure : 0-24 mA (scalable)
• Display scale : -99999 to 99999 counts (for mA measure input)
• Display Hold : One touch hold provided on front key
• Power Supply : 9V DC ±5% / 200mAh Rechargeable battery with battery life 4hours
  with out back light (or) 9V DC adapter /230V AC supply operated
• Pump Weight (Approx.) : 700 grams
• Pc Interface : RS 485
• Pc Software : Windows based semi automatic calibration software (optional)

• Model: MTC-02
• Type: R, S
• Temperature Range:
  (a) 200 to 1500°C
  (b) 100 to 1200°C
• Accuracy: Class 1 (0.6°C or 0.1% of Temperature which ever is greater)
• Temperature Scale: ITS-90
• Sheath Material: K-99 grade ceramic
• Thermocouple wire dia: 0.5mm
• Probe dia & Length: 6mm OD & 450mm Length
• Reference Junction Sheath Dimensions: 250mm Long, 5mm Diameter
• Cable Length Between sensor and CJS sensor: 700mm
• Cable Length from CJC sensor: 1.5 meter length
• Handle Dimension: 20mm OD & 100mm Length
• Calibration Certified: ISO/IEC 17025 Accredited 5 point

The RPMC 1700 Series is high precision Tachometer calibrator, generates true reference rotation per minute (RPM). This calibrator uses “German technology” with high speed motor, high precision encoder and adoption of a new power full 32 bit CPU in control drive, featuring automated gain tuning function, stability, stable stop, rugged in use and many more.

Due to it’s light weight and rugged Aluminium enclosure, it is suitable for in-house and on-site calibration of contact / non contact Tachometer, Tacho coil, Tacho generator, RPM indicator, RPM transmitter, Speedo meter, Proximity sensor, Stroboscope, etc.,.

Features:

• 7” True colour TFT display with Touch screen
• Low noise
• Quick settling time
• Better stability
• Any odd value is settable for both contact & Non - contact RPM
• High resolution
• Ultra stable motor with high precision encoder and drive
• Direct drive shaft (there is no gear)
• Compact size

Specifications:

• Model : RPMC 1700 - 3A
• Control Range :Contact : 0 to 8000 RPM Non Contact : 0 to 1,20,000 RPM
• Resolution : 0.001 RPM
• Display Stability : Contact : ± 0.002 RPM, Non Contact : ± 0.01 RPM
• Stability : Contact : ± 0.1 RPM, Non Contact : ± 2 RPM
• Accuracy : Contact : ± 0.2 RPM, Non Contact : ± 5 RPM
• Display : 7” True colour TFT LCD Display with Touch screen
• Stability Time : Within 5 seconds
• Within 5 seconds : < 50dB
• Noise level : < 50dB
• Motor : Ultra stable motor with high resolution Encoder & Drive
• Power supply : 230V AC ± 10% / 50Hz (Optional 110V AC)
• Power Consumption : 750 VA
• Outer Enclosure Construction : Aluminium Anodised
• Overall Dimension : 260mm L x 440mm W x 230mm H (Approx.)
• Instrument Weight :13 kg(Approx.) 

The RPMC 1700 Series is high precision Tachometer calibrator, generates true reference rotation per minute (RPM). This calibrator uses “German technology” with high speed motor, high precision encoder and adoption of a new power full 32 bit CPU in control drive, featuring automated gain tuning function, stability, stable stop, rugged in use and many more.

Due to it’s light weight and rugged Aluminium enclosure, it is suitable for in-house and on-site calibration of contact / non contact Tachometer, Tacho coil, Tacho generator, RPM indicator, RPM transmitter, Speedo meter, Proximity sensor, Stroboscope, etc.,.

Features:

• 7” True colour TFT display with Touch screen
• Low noise
• Quick settling time
• Better stability
• Any odd value is settable for both contact & Non - contact RPM
• High resolution
• Ultra stable motor with high precision encoder and drive
• Direct drive shaft (there is no gear)
• Compact size

Specifications:

• Model : RPMC 1700 - 2A
• Control Range :Contact : 0 to 6000 RPM Non Contact : 0 to 1,02,000 RPM
• Resolution : 0.1 RPM
• Display Stability : ± 0.1 RPM (for both Contact & Non Contact)
• Accuracy : Contact : ± 0.3 RPM, Non Contact : ± 5 RPM
• Display : 4.3” True colour TFT LCD Display with Touch screen
• Stability Time : Within 5 seconds
• Within 5 seconds : < 50dB
• Motor : Ultra stable motor with high resolution Encoder & Drive
• Power supply : 230V AC ± 10% / 50Hz (Optional 110V AC)
• Power Consumption : 750 VA
• Outer Enclosure Construction : Aluminium Anodised
• Overall Dimension : 260mm L x 440mm W x 230mm H (Approx)
• Instrument Weight : 13 kg  (Approx.)

It is one of the smallest dry block with rich features and is highly competitive in price. SANSEL Model TCAL 1404/500, (Dry Block Miniature Temperature Calibrator) sets a new benchmark in temperature calibration with advanced features that deliver unmatched precision, ease of use, and operational stability. Temperature range of the TCAL 1404/500 covers from Amb. +5 to 500 C. Our Drywell Calibrators are ideally suited for fast calibration in process industries to calibrate Thermocouple, RTD, Indicator with sensors & transmitters with sensors, this compact yet powerful calibrator is designed to meet the stringent demands of today™s laboratories and field operations.

Specifications:

Model TCAL 1404/500

Display 2.8" True TFT with Touch screen

Temperature Range: -5 to 500C

Radial uniformity: �0.05C

Resolution: 0.01 C

Stability: �0.08 C

Temperature readout: C

Heating time: Amb to 500 --> 25 min

Cooling time: 500 to 50--> 1 hr 20 min

Stabilization time: 15 mins

Well Dimension(dia. x height): 20 x 100 mm

Well immersion depth; 90 mm

Standard well holes in mm: 6.5 x 2nos

Power supply: 230V AC � 10% / 50Hz (Optional 110V AC)

Power consumption; 350 w

Overall Dimension in mm: 170 x 95 x 183 mm

Instrument Weight: 3.75 Kg

It is one of the smallest dry block with rich features and is highly competitive in price. SANSEL Model TCAL 1404/300, (Dry Block Miniature Temperature Calibrator) sets a new benchmark in temperature calibration with advanced features that deliver unmatched precision, ease of use, and operational stability. Temperature range of the TCAL 1404/300 covers from Amb. +5 to 300C. Our Drywell Calibrators are ideally suited for fast calibration in process industries to calibrate Thermocouple, RTD, Indicator with sensors & transmitters with sensors, this compact yet powerful calibrator is designed to meet the stringent demands of today™s laboratories and field operations.

Specifications:

Model TCAL: 1404/300

Display: 2.8" True TFT with Touch screen 

Temperature Range: Amb. +5 to 300C

Radial uniformity (Better than): �0.03C

Resolution: 0.01 C

Stability: �0.04 C

Temperature  readout: C

Heating time: Amb to 300-->23min

Cooling time: 300 to 50 -->30 min

Stabilization time: 15 mins

Well Dimension (dia. x height): 20 x 100 mm

Well immersion depth: 90 mm

Standard well holes in mm: 6.5 x 2nos

Power supply 230V AC � 10% / 50Hz (Optional 110V AC)

Power consumption 250 w

Overall Dimension in mm 170 x 95 x 183 mm 

Instrument Weight 2.75 Kg