Process Control Instruments

• Model: PI – 542A
• Display: 4 Digit, 0.5” 7 segment RED LED
• Analog inputs: 0 - 20 mA, 0 to 70 mV, 0 - 10 V DC, 0.0 – 400.0 Ω (H & L Limit Programmable)
• Temperature inputs: RTD - PT 100, Thermocouple - J, K, R, S, T, B, N, E
• Display Range: -1999 to 9999 counts (H & L Limit programmable)
• Temperature range (H & L Limit programmable):
  RTD - PT 100 (-199.9 to 800.0°C )
  TC - J (- 200 to 200°C )
  TC - K (- 200 to 1372°C )
  TC - R ( 0 to 1765°C )
  TC - S ( 0 to 1762°C )
  TC - T (- 199.9 to 400.0°C )
  TC - B ( 600 to 1800°C )
  TC - N (-200 to 1300°C )
  TC - E ( -199.9 to 916.0°C )
• Accuracy:
  0.05% FS ±1 counts (Except Thermocouple)
  0.05% FS ±2 counts (only for Thermocouple)
• Unit selection: °C / °F (for RTD & TC inputs)
• Analog input resolution mV, mA & V: 0.001 / 0.01 / 0.1 / 1 (Selectable)
• Temperature resolution: 0.01 (For RTD - PT 100 input (°C) only) /0.1 / 1 °C / °F
• Filter constant: 1 – 100% (adjustable)
• Relay Output* (optional): 2 Relay (5A rated) with 4 Relay Status Selection, Adjustable Hysteresis, Cyclic Delay
• Re Transmission* (optional): Opto Isolated Analog Output 4 - 20 mA or 0 - 10V DC
• PC communication* (optional): RS 485 (2 wire) MODBUS RTU protocol
• PC Software* (optional): Monitoring, Data logging, Report & graph
• Sensor Supply (external): 24 V DC ±10% @ 100 mA
• Operating environment: 0 to 50°C / 5 to 95% RH non condensing
• Power supply: 90 to 270 V AC / DC / 50/60 Hz
• Overall Dimensions: 48(H) X 96(W) X 110(D) mm
• Cut out Dimension: 44(H) x 90(W) mm
• Housing: Panel mountable ABS plastic
• Weight: 300 grams (Approx.)

Descriptions:

The PIJ 541 B1 Jumbo display universal input process indicator is incorporated with high accuracy 24bit ADC , 6-digit industrial display indicator accept any one input from Thermocouple, RTD, mV, mA and Resistance, with the capability of measuring and indicating temperature, pressure, flow, level and other process variables. The standard PIJ 541 B1 provides a retransmission output, alarm relay outputs and RS-485 MODBUS communications can be added to suit your applications. The input and output are easily configurable by front panel keys. The PIJ 541 B1 has been designed to provide reliable indications in the harshest environments.

• Model: PIJ – 541 B1
• Display: 2” or 4” or 8” 6 Digit 7 segment RED LED*
• Accuracy: ± 0.1 % of FS
• Analog inputs: 4 – 20 mA, 0 - 20 mA, 0 to 70 mV, 0 to 10 V DC, 0 – 400 Ω (H & L Limit Programmable)
• Temperature inputs: RTD - PT 100, PT 1000, Thermocouple - J, K, R, S, T, B, N, E
• Analog display range: -199999 to 199999 (H & L Limit programmable)
• Temperature range (H & L Limit programmable):
  RTD - PT 100 (-199.99 to 850.00°C / -327.5 to 1562.0 °F)  RTD - PT 1000 (-50.0 to 400.0°C / -58.0 to 752.0 °F)  TC - J (- 200 to 1200°C / -328 to 2192°F)

  TC - K (- 200 to 1372°C / -327 to 2501°F)
  TC - R (- 40 to 1768°C / -40 to 3214°F)
  TC - S (- 40 to 1768°C / -40 to 3214°F)
  TC - T (- 200 to 400°C / -328 to 752°F)
  TC - B (300 to 1820°C / 572 to 3308°F)
  TC - N (-200 to 1300°C / -327 to 2372°F)
  TC - E ( -200 to 1000°C / -327 to 1832°F)

• Unit selection: °C / °F ( for RTD & TC inputs)
• Analog input display resolution: 0.0001 / 0.001 / 0.01 / 0.1 / 1 (Selectable)
• Temperature resolution: 0.1 / 1 °C / °F (optional 0.01 for RTD - PT 100 I/P up to 99.99 °C Factory presetable)
• Filter constant: 1 – 100% (Adjustable)
• Display hold option: Peak, hold & average (any one selectable)
• Hold delay: 0 - 999 sec (selectable)
• Relay Output (option
• al): 2 Relay (5A rated) with 6 Relay Status Selection, Adjustable, Hysteresis, Cyclic Delay
• Re Transmission (optional): Opto Isolated Analog Output 4 - 20 mA or 0 - 10V DC
• PC communication (optional): RS 485 (2 wire) MODBUS RTU protocol
• PC interface software: Monitoring, Data logging, Report & Graph (Optional)
• Sensor Supply (external): 24 V DC ±10% @ 100 mA
• Power supply: 230 V AC / 50 Hz
• Overall dimension: 611 x 171 x 85 (L x H x D) mm (Approx.)
• Housing : MS Powder coating
• Mounting: Wall or sealing with 360 º rotatable clamp
• Operating environment: 0 - 50°C / 5 to 95% RH Non condensing
• Weight (Approx.): 5.5 (or) 8.5 kg

• Model: PI – 541A

• Display: 6 Digit 7 segment RED LED

• Inputs: 0 - 20 mA, 0 to 75 mV, -10 to 10 V DC, 0 – 4000 Ω (H & L Limit Programmable)
  RTD - PT 100, PT-1000, Thermocouple - J, K, R, S, T, B, N, E

• Cold junction Accuracy: ± 0.3°C

• Resolution: 0.0001 / 0.001 / 0.01 / 0.1 / 1°C Selectable for Analog
  0.01°C for RTD and 0.1°C for TC

• Unit selection: °C / °F (for RTD & TC inputs)

• Linearization: Programmable custom Linearization provided (1 - 21 points)

• Input signal filter: 1 – 100% user configurable

• Cold junction compensation: Automatic inbuilt ‘CJC’ is provided

• Relay Output* (optional): 2 Relay (5A rated) with 4 Relay Status Selection, Hysteresis, Cyclic Delay

• Alarm settings: Front key settable

• Alarm indication : Two LED on front panel

• Re Transmission* (optional): Opto Isolated Analog Output 4 - 20 mA or 0 - 10V DC for process variable

• PC communication* (optional): RS 485 (2 wire) MODBUS protocol

• PC Software* (optional): Monitoring, Data logging, Report & graph

• Sensor excitation Supply: 24 V DC ±10% @ 100 mA

• Power supply: 90 to 270 V AC / DC / 50/60 Hz

• Front panel : IP 65 protection

• Operating environment: 0 to 50°C / 5 to 95% RH non condensing

• Overall Dimensions: 48(H) X 96(W) X 110(D) mm

• Cut out Dimension: 44(H) x 90(W) mm

• Enclosure: ABS plastic

• Weight: 350 grams (Approx.)

• Model: PIJ – 542 C1
• Display: 2” or 4” or 8” 4 Digit 7 segment RED LED*
• Accuracy: ± 0.1 % of FS
• Analog inputs: 4 – 20 mA, 0 - 20 mA, 0 to 70 mV, 0 to 10 V DC, 0 – 400 Ω (H & L Limit Programmable)
• Temperature inputs: RTD - PT 100, Thermocouple - J, K, R, S, T, B, N, E
• Analog display range: -1999 to 9999 (H & L Limit programmable)
• Temperature range (H & L Limit programmable):
  RTD - PT 100 (-199.9 to 850.0°C / -199.9 to 999.9 °F)
  TC - J (- 200 to 1200°C / -328 to 2192°F)
  TC - K (- 200 to 1372°C / -327 to 2501°F)
  TC - R (- 40 to 1768°C / -40 to 3214°F)
  TC - S (- 40 to 1768°C / -40 to 3214°F)
  TC - T (- 200 to 400°C / -328 to 752°F)
  TC - B (300 to 1820°C / 572 to 3308°F)
  TC - N (-200 to 1300°C / -327 to 2372°F)
  TC - E ( -200 to 999.9°C / -327 to 1832°F)
• Unit selection: °C / °F ( for RTD & TC inputs)
• Analog input display resolution: 0.001 / 0.01 / 0.1 / 1 (Selectable)
• Temperature resolution: 0.1 / 1 °C / °F (optional 0.01 for RTD - PT 100 I/P up to 99.99 °C Factory presetable)
• Filter constant: 1 – 100% (Adjustable)
• Display hold option: Peak, hold & average (any one selectable)
• Hold delay: 0 - 999 sec (selectable)
• Relay Output (optional): 2 Relay (5A rated) with 6 Relay Status Selection, Adjustable, Hysteresis, Cyclic Delay
• Re Transmission (optional): Opto Isolated Analog Output 4 - 20 mA or 0 - 10V DC
• PC communication (optional): RS 485 (2 wire) MODBUS RTU protocol
• PC interface software: Optional
• Sensor Supply (external): 24 V DC ±10% @ 100 mA
• Power supply: 230 V AC / 50 Hz
• Overall dimension: 760 x 320 x 85 (or) 1125 x 320 x 85 (L x H x D) in mm (Approx.)
• Housing : MS Powder coating
• Mounting: Wall or sealing with 360 º rotatable clamp
• Operating environment: 0 - 50°C / 5 to 95% RH Non condensing
• Weight (Approx.): 7.5 (or) 8.5 kg

• Model : PI 590-1
• Display: 16 character x 2 line LCD
• Input: -75 to +75mV / 0 to +20mA / -10 to + 10V ( programmable Input Lo & Hi Limits)
• Range: -199999 to +199999 (programmable Range Lo & Hi Limits)
• Resolution: 0.00001 / 0.0001 / 0.001 / 0.01 / 0.1 / 1 (selectable)
• Accuracy : ± 0.1% of FS / ± 0.05 % of FS
• Sensor Supply Working : 24 V DC / 100 mA
• Relay Output (Optional): 2 NO , 2 COM 5 A Rated Relay with individual H / L set
• Re transmission Output (Optional) : 4 - 20 mA (or) 0 - 10V DC (Factory Selectable)
• Working temperature : 0 - 50 ºC
• Power Supply : 90 to 270V AC / DC 50Hz
• Dimension : 96 x 96 x 65 mm.
• Weight : 200 grams (Approx.)

SANSEL offers PROCESS INDICATORs are extremely versatile Indicators that can be used for a wide variety of applications. These INSTRUMENT offer extreme reliability and low cost for Process measurement and logging. PI 542A is a Microprocessor based instrumentation ensures accurate readings for all Linear
Parameters. A number of programmable features including In-line calibration are standard. All the parameters are saved in a non volatile EEPROM memory which doesn't needs any external battery.
PI 542A can offer relay outputs for signals exceeding set points. Programmable Re Transmission output models are also available in addition to the industry standard 4 -20mA or 0 - 10V DC output. Optional RS 485 (2 wire ) output also provided for PC communication with PC Interface software & also with MODBUS RTU protocol.

Features

• 4 Digit 7 segment RED LED display
• High Accuracy
• Compact Size
• 24 Bit ADC Resolution
• Selectable Inputs RTD , all types of thermocouples , mA, mV , Voltage , ohms.
• Wide Selectable Range between -1999 to 9999 counts
• Easy Field Configurable with Front Key Calibration
• No Hardware Selection For the Input Signals
• Optional Opto Isolated Re Transmission Output.
• Optional RS 485 (2 wire) Output for PC communication
• Optional PC software with Monitoring, Logging, Report & Graph
• Optional MODBUS RTU protocol
• 24V DC External Sensor Supply
• Programmable Decimal Point & Display Noise Filter
• Universal Supply Voltage 90 to 270 AC / DC

Specification

• Display 4 Digit 7 segment RED LED
• Analog Inputs 0 - 20 mA, 0 to 75 mV, -10 to 10 V DC, 0 - 400 Ù (H & L Limit Programmable)
• Temperature Inputs RTD - PT 100, Thermocouple - J, K, R, S, T, B, N, E
• Analog Display Range* - 1999 to 9999 (H & L Limit Programmable)
• Temperature Range RTD - PT 100 (-199.9 to 850.0°C / -199.9 to 1562°F)
• (H & L Limit Programmable) RTD - PT 1000 (-50.0 to 400.0°C / -58.0 to 752.0°F)
• TC - J (- 200.0 to 200°C / -328.0 to 2192°F)
• TC - K (- 200.0 to 1372°C / -327.8 to 2501°F)
• TC - R (- 40.0 to 1768°C / -40.0 to 3214°F)
• TC - S (- 40.0 to 1768°C / -40.0 to 3214°F)
• TC - T (- 200.0 to 400°C / -328.0 to 752°F)
• TC - B (300.0 to 1820°C / 572.0 to 3308°F)
• TC - N (-200.0 to 1300°C / -327.8 to 2372°F)
• TC - E ( -200.0 to 999.9°C / -327.8 to 1832°F)
• Unit selection °C / °F (for RTD & TC inputs)
• Analog Resolution 0.001 / 0.01 / 0.1 / 1 (Selectable)
• Temperature Resolution 0.01(for RTD-PT 100 input(°C) only) / 0.1 / 1 °C / °F
• Accuracy ± 0.1 % of FS
• Filter Constant 1 - 100 % (Adjustable)
• Relay Output**(optional) 2 Relay
• Re Transmission**(optional) Opto Isolated Analog Output 4 - 20 mA or 0 - 10V DC
• PC Communication** RS 485 (2 wire)(optional)
• PC Software**(optional) Monitoring, Data Logging, Report & Graph
• Sensor Supply(external) 24 V DC ±10% @ 100 mA
• (5A rated) with Four Relay Status Selection, Hysterisis, Cyclic Delay
• Operating Environment 0 - 50ºC / 5 to 95 % RH Non Condensing
• Power Supply 90 to 270 V AC / DC / 50 / 60 Hz
• Over All Dimension 48(H) X 96(W) X 110(D) mm
• Cut out Dimension 44(H) X 90(W) mm
• Housing Panel Mountable ABC Plastic
• Weight 250 grams (Approx.)

Fetaures

• 4 Digit Seven Segment LED Display
• Seconds, Minutes, Hours Configurable
• Selectable Resolution 0.01 / 0.1 / 1
• 2 Relay Outputs with Selectable Delay Mode
• Front End Reset with Protection
• External Start / hold / Reset Options
• 10 Years Memory Backup
• Universal Supply Voltage 90 to 270V AC / DC

Specification

• Model: DT 70A
• Display: 4 Digit 0.5” RED Seven Segment LED
• Accuracy: ± 0.05% Of Selected Range
• Range: 99.59, 999.9, 9999 Secs / Mins / Hrs (Programmable)
• Resolution: 0.01 Sec/Min/Hr
• External Input: START / HOLD / RESET (potential free contact inputs)
• Relay output: 2 NO , 2 NC 5 A Rated Relay
• Power Supply: 90 to 270V AC / DC 50Hz
• Dimension: 72 x 72 x 110 mm
• Working temperature: 0 – 50°C
• Weight: 200 grams (Approx.)

Features :

• 3 + 3 Digit Seven Segment LED Display
• Seconds, Minutes, Hours Configurable
• Selectable Resolution 0.01 / 0.1 / 1
• Relay Outputs with Selectable Delay Mode
• Front End Reset with Protection
• External Start / Reset Options
• 10 Years Memory Backup
• Universal Supply Voltage 90 to 270V AC / DC

Specification :

• Model: DT 271
• Display: 3 Digit 0.5” RED Seven Segment LED For PV +
• 3 Digit 0.39” Green Seven Segment LED For SV
• External Input: START / RESET (potential free contact inputs)
• Accuracy: ± 0.05 % of Range
• Range: 9.99, 99.9, 999 secs / mins / hrs (selectable)
• Resolution: 2 NO , 2 NC 5 A Rated Relay
• Relay output: 0.01 sec/ min/ hr
• Power Supply: 90 to 270V AC / DC 50Hz
• Dimension: 72 x 72 x 65 mm
• Working temperature: 0 – 50°C
• Enclosure : ABS plastics
• Weight: 200 grams (Approx.)

Measurement of relevant climatic data is becoming more and more important in Clean room , Storage, Manufacturing, Testing and Calibration lab, Research lab etc,. This Humidity, Temperature & Pressure indicator offer very accurate measurement of Relative Humidity, Temperature and Absolute pressure (or) differential pressure by excellent readability of very high intensity seven segment LED display.

The Humidity ,Temperature & Pressure indicator housed with rugged case allow to use in tough industrial environments, Latest technology and well proven sensor guaranteed high accuracy and long term stable measurement.

Features :

• High intensity , 7 segment LED display for long distance viewing
• Pre selectable ( Low & High ) alarm output for all three parameter
• Two relay with one buzzer output
• Easy wall mountable with key hole provision.
• Compact in size and rugged use , etc.

Features :

• 4 Digit Seven Segment LED Display
• Wide Range 0 - 9999 RPM / RPS / RPH
• 3 to 30V DC Input Pulse from any type Sensor
• Allows Maximum 3.5 kHz Input Pulse Speed
• RPM / Rate / Frequency Front Key Scalable.
• 2 Relay Output with Front Key Set table Hi & Lo Set points
• Power ON Delay & Hysterisis for Relay Output is Provided
• 12 V DC Sensor Supply
• Universal Supply Voltage 90 to 270V AC / DC

Specifications

• Model: RP 471
• Display: 4 Digit 0.5” 7 segment Red LED
• Accuracy: ± 0.05 % (± 1 count)
• Range: 10 - 9999 RPM / RPS / RPH
• Resolution: 0.001, 0.01, 0.1, 1 RPM / RPS / RPH (selectable)
• Input: 3 - 30V DC from Proximity Sensor, Photoelectric Non Contact Sensor, Encoder, Potential Free Contacts, Limit Switch etc.,.
• Input speed: 3.5 kHz (Max.)
• Scale factor: 0.001 to 9.999
• Exponential: 10n = -3, -2, -1, 0, 1, 2
• Relay output: 2 NO , 2 NC 5A rated Relays(power ON Delay & Hysteresis provided)
• Sensor supply: 12V DC (±10%) 50mA
• Working temperature: 0 – 50°C
• Power Supply: 90 to 270V AC / DC 50Hz
• Dimension: 72 x 72 x 65 mm
• Weight: 200 grams (Approx.)

Features :

• 4 Digit seven segment LED display
• Wide range 10 RPM – 9999 RPM
• 3 to 30V DC Input Pulse from any type Sensor
• Allows Maximum 3.5 kHz Input Pulse Speed
• 12 V DC Sensor Supply
• Universal Supply Voltage 90 to 270V AC / DC
• Conveyors speed monitoring
• Motor Speed Monitoring
• All types of Speed Monitoring

Specifications :

• Model: RP 430
• Display: 4 Digit 0.5” seven segment Red LED
• Accuracy: ± 0.05 % (± 1 count)
• Range: 10 RPM to 9999 RPM
• Resolution: 0.001, 0.01, 0.1, 1 RPM (Auto ranging)
• Input: 3 - 30V DC from Proximity Sensor, Photoelectric Non Contact Sensor, Encoder, Potential Free Contacts, Limit Switch etc.,.
• Input speed: 3.5 kHz (Max.)
• Sensor supply: 12V DC (±10%) 50mA
• Working temperature: 0 – 50°C
• Power Supply: 90 to 270V AC / DC 50Hz
• Dimension: 36 x 72 x 65 mm
• Weight: 100 grams (Approx.)

Features :

• 4 Digit seven segment LED display
• Wide range 10 – 9999 RPM / RPS / RPH
• 3 to 30V DC Input Pulse from any type Sensor
• Opto isolated Re-transmission analog output 4-20mA or 0-10V DC
• Optional RS 485 (2 wire) MODBUS RTU Protocol communication
• Allows Maximum 3.5 kHz Input Pulse Speed
• 12 V DC Sensor Supply
• Universal Supply Voltage 90 to 270V AC / DC
• RPM / Rate / Frequency Front Key Scalable
• Scale factor & Exponential are Pre-settable
• 2 Relay Output with Front Key Set table Hi & Lo Set points
• Power ON Delay & Hysteresis for Relay Output is Provided
• Speed Monitoring
• Speed Control High & Low Speed Alarm
• Length Measurement & Control
• Line Frequency Monitor & Alarm
• All types of Speed / Rate / Frequency Monitoring & Control Applications

Specification :

• Model: RP 491
• Display: 4 Digit 0.5” 7 segment Red LED
• Accuracy: ± 0.05 % (± 1 count)
• Range: 10 - 9999 RPM / RPS / RPH
• Resolution: 0.001, 0.01, 0.1, 1 RPM / RPS / RPH (selectable)
• Input: 3 - 30V DC from Proximity Sensor, Photoelectric Non Contact Sensor, Encoder, Potential Free Contacts, Limit Switch etc.,.
• Input speed: 3.5 kHz (Max.)
• Scale factor: 0.001 to 9.999
• Exponential: 10n = -3, -2, -1, 0, 1, 2
• Relay output: 2 NO , 2 NC 5A rated Relays(power ON Delay & Hysteresis provided)
• Re-transmission (optional): Opto isolated analog output 4-20mA or 0-10V DC
• Communication (optional): RS 485 (2 wire) MODBUS RTU Protocol
• Sensor supply: 12V DC (±10%) 50mA
• Working temperature: 0 – 50°C
• Power Supply: 90 to 270V AC / DC 50Hz
• Dimension: 96 x 96 x 65 mm
• Weight: 350 grams (Approx.)

Features

• 6 Digit Seven Segment LED Display
• Wide counting Range 999999
• 3 to 30V DC Input Pulse from any type of Sensor
• Allows Maximum 3.5 kHz Input Pulse Speed
• Selectable input pulse speed Low / Medium / High
• 2 Relay output with front key set table 2 high set points
• Front key Reset with Protection
• Cumulative count display
• 10 Years Memory Backup
• 12 V DC Sensor Supply
• Universal Supply Voltage 90 to 270V AC / DC

Specification

• Model: DC 370
• Display: 6 digit 0.39“ seven segment red LED
• Range: 0 – 999999 counts
• Resolution: 1 count / pulse
• Input: 3 - 30V DC pulse input from Proximity sensor, Photoelectric Non Contact Sensor, Encoder, Potential Free Contacts, Limit switch etc.,
• Input speed: 3.5 kHz (max.)
• Sensor supply: 12V DC (± 10%) 50 mA
• Relay output : 2 NO , 2 NC 5 A Rated Relays
• Working temperature: 0 to 50°C
• Power supply: 90 – 270V AC / DC 50Hz
• Dimension: 72 x 72 x 65 mm
• Weight: 200 grams (Approx.)

Features :

• 6 Digit Seven Segment LED Display
• Wide counting range 999999 counts
• 3 to 30V DC Input Pulse from any type of Sensor
• Allows Maximum 3.5 kHz Input Pulse Speed
• Selectable input pulse speed low / medium / high
• Front key Reset with Protection
• External Reset Options
• 10 Years Memory Backup
• 12 V DC Sensor Supply
• Universal Supply Voltage 90 to 270V AC / DC

Specification :

• Model: DC 330
• Display: 6 digit 0.3“ seven segment LED display
• Range: 0 – 999999 counts
• Resolution: 1 count / pulse
• Input: 3 - 30V DC pulse input from Proximity sensor, Photoelectric Non Contact Sensor, Encoder, Potential Free Contacts, Limit switch etc.,
• Input speed: 3.5 kHz (max.)
• Sensor supply: 12V DC (± 10%) 50 mA
• Working temperature: 0 to 50°C
• Power supply: 90 – 270V AC / DC 50Hz
• Dimension: 36 x 72 x 65 mm
• Weight: 100 grams (Approx.)

Features :

•  Multi colour TFT display
•  Easy touch screen to configure & copy the datas
•  8 , 16 , 24 , 32 Channel Inputs with fixed & Universal Inputs
•  Analog Inputs like Thermocouple , RTD, mA, mV , V
•  Internal Memory for Datas upto 25,000 records
•  USB 2.0 for PEN drive data transfer
•  Parallel port provided for direct printout the storage datas
•  PC Interface through RS 485 or RS 232 or USB or Ethernet (TCP/IP)
•  Common Alarm Output with H/L Settings for all channels
•  Easy Mounting , Compact Size and rugged
•  Supply 230V AC

Specifications:

• Model : DL 96/97
• Display : Multi colour TFT display with Touch screen
• No. of Channel : 8 or 16or 24 or 32 channel
• Password Access :Provided for all configuration settings
• Analog & Temp. Inputs
• (selectable for Universal Model) : RTD- PT100 TC-J,K,R,S, mA, mV, Volt
• Input Range (optional against order) : O)RTDPI10099.9 to 300.0 C
• (-199.9 to 300.0 optional)
• (2) 0-20 mA:-999 to 4000(-1999 to 9999 optional)
• (3) 4-20 mA999 to 4000
• (4) 01Vdc:-999 to 4000
• (5) 05 Vdc-999 to 4000
• (6) TC J:0to 700 °C
• (7) TC-K0 to 1200°C
• (8) TC-S:0to 1600° C
• (9) TC-R:0to 1600°C
• Alarm Output : 1 or2Common Relay(5ARated)
• Aarm Set point : High & Low Set point tor each channel(user selectable)
• Log Interval : 1sec to 24 hour (selectable)
• PC software : Provided With logging, Alarm Setup, Record, Graph
• PC Communication : RS 232 or RS 485 or USB or Ethernet (TOP/IP)
• Baud Rate : 19600 bps
• Printer port : Parallel printer port provided
• USB Connecton : USB2.0Tor PENdrive data transter
• Termperature drift : ≤0.01% FSC(typical 50 ppm)
• Elecromagnetic Compatibility : TEC6T0OOE4KVI5KFZIEC6TOOO-4-5, 4KV
• Response time : ≤1.5 seconds if digital filter parameter is set as 0 or 1
• Automatic pilot time : Approx12s or 2s confiqurable
• Enclosure : Aluminium case
• Mounting : Panel Mounting
• Operating Environment : 0 to 50C 20 to 95.% RH non condensing
• Weight : 1kg

Measurement of relevant Climatic data is becoming more and more important.This Humidity & Temperature Indicator offer Very Accurate Measurement of Relative Humidity and Temperature by Excellent readability of the very High intensity Seven Segment LED Display. The Humidity & Temperature Indicator Housed with roughest Case allow the use in tough industrial environments, Latest Technology and well Proven Sensor Guaranteed Highest Accuracy and Long Term Stable Measurement.

Features :

• 4 Digit 2 Line 2”, 4” , 8” Seven Segment LED Display
• Temperature Range from - 40 to 125ºC
• Humidity Range from 0 to 100% RH
• High Resolution 0.01 or 0.1ºC / 0.1 % RH
• High Accuracy ±0.3ºC / ± 1.5 %RH
• Optional 2 relay Output with Individual H / L Set
• Optional Opto Isolated Retransmission Output
• Easy Mounting
• Compact Size and rugged
• Supply 230 V AC

Specifications :

• Display 4 +4 Digit 2" or 4" or 8" Seven Segment LED Display (Display size depends up on customer requirement)
• Range "* 0-60°C / 0 -100%RH (Depends on Sensor)
• Resolution * 0.1 or 001°C / 0.1°/0RH
• Accuracy "* " Depends on Sensor
• Mounting Wall Mountable
• Operating Temp.& Humd. 0 - 50°C / 20 to 95 % RH Non Condensing
• Power Supply 230V AC / 50Hz
• Weight 5 kg (Approx.)

Optional :

• Temperature and Humidity Sensor / Transmitter
• 2 Relay Output with individual High / Low set point
• Retransmission 4-20mA

Features :

• View the Count Display From Long Distance 3 to 30V DC Input From any type of Pulse 0/P Sensor
• 4" & 8" Available in Different Segment Sizes (1" & 2" on Request)
• Different type of Mounting Wall, Selling, Panel, "L" Clamping
• 6 Digit Seven Segment LED Display
• Wide Range 999999 Counts
• Allows Maximum 3.5 kHz Input Pulse Speed
• NPN PNP , LIMIT Switch,etc., differnet type of Input selection
• Front End Reset with Protection
• External Reset Options
• 10 Years Memory Backup
• 12 V DC Sensor Supply
• Supply Voltage 230V AC

Specifications:

• Model: BW 16D (4” display) & BW 17D (8” display)
• Display: 6 digit 2”, 4”, & 8” height 7 segment red LED display
• Range: 0 – 999999 counts
• Resolution: 1 count / pulse
• Input: 3-30V DC pulse from Proximity sensor, Photoelectric non-contact sensor, Encoder Potential free contacts, Limit switch, etc.,.
• Memory backup: Provided if power is failure
• Input speed: 3.5 kHz (Max.)
• Sensor supply: 12V DC (±10%) 50mA
• Power Supply: 230V AC / 50Hz
• Working temperature: 0 – 50°C
• Weight: 8 kg

In the world of modern industrial and manufacturing environments, efficiency, productivity and safety are paramount. To achieve optimal performance, Operators and supervisors rely on advanced tools and technologies that provide real-time insights into the status of critical processes parameter to view from a long distance. One such tool is the jumbo display indicator, This series of big display indicators has a display height of 2’’,4’’,8’’ and 12’’sizes, which are visible distance from 50 feet, 100 feet, 200 feet and 400 feet.

These Large size Display Indicator serves as a beacon of information, offering clear and immediate visibility into the ongoing wide range of process parameter applications such as Temperature, Humidity, Pressure, Flow, Level, pH, TDS, Conductivity, Production counting, RPM, Timing, Power, Voltage, Current, Frequency etc.,. these large displays play a pivotal role in keeping operations running smoothly.

We offer customization options to tailor our big display indicators to your specific needs, applications are multiple indicators with different parameters in one panel.

Specifications:

• Model: PIJ – 542 A1
• Display: 2” or 4” or 8” 4 Digit 7 segment RED LED*
• Accuracy: ± 0.1 % of FS
• Analog inputs: 4 – 20 mA, 0 - 20 mA, 0 to 70 mV, 0 to 10 V DC, 0 – 400 Ω (H & L Limit Programmable)
• Temperature inputs: RTD - PT 100, Thermocouple - J, K, R, S, T, B, N, E
• Analog display range: -1999 to 9999 (H & L Limit programmable)
• Temperature range (H & L Limit programmable):

RTD - PT 100 (-199.9 to 850.0°C / -199.9 to 999.9 °F)

TC - J (- 200 to 1200°C / -328 to 2192°F)

TC - K (- 200 to 1372°C / -327 to 2501°F)

TC - R (- 40 to 1768°C / -40 to 3214°F)

TC - S (- 40 to 1768°C / -40 to 3214°F)

TC - T (- 200 to 400°C / -328 to 752°F)

TC - B (300 to 1820°C / 572 to 3308°F)

TC - N (-200 to 1300°C / -327 to 2372°F)

TC - E ( -200 to 999.9°C / -327 to 1832°F)

• Unit selection: °C / °F ( for RTD & TC inputs)
• Analog input display resolution: 0.001 / 0.01 / 0.1 / 1 (Selectable)
• Temperature resolution: 0.1 / 1 °C / °F (optional 0.01 for RTD - PT 100 I/P up to 99.99 °C Factory presetable)
• Filter constant: 1 – 100% (Adjustable)
• Display hold option: Peak, hold & average (any one selectable)
• Hold delay: 0 - 999 sec (selectable)
• Relay Output (optional): 2 Relay (5A rated) with 6 Relay Status Selection, Adjustable, Hysteresis, Cyclic Delay
• Temperature drift: ≤ 0.1% FS/°C (typical 50 ppm)
• Re Transmission (optional): Opto Isolated Analog Output 4 - 20 mA or 0 - 10V DC
• PC communication (optional): RS 485 (2 wire) MODBUS RTU protocol
• PC interface software: Optional
• Sensor Supply (external): 24 V DC ±10% @ 100 mA
• Power supply: 230 V AC / 50 Hz
• Overall dimension: 428 x 171 x 85 (L x H x D) mm (Approx.)
• Housing : MS Powder coating
• Mounting: Wall or sealing with 360 º rotatable clamp
• Operating environment: 0 - 50°C / 5 to 95% RH Non condensing
• Weight (Approx.): 4.5 kg

Features :

• View the Count Display From Long Distance 4" , 8" Available in Different Segment Sizes (1" & 2" on Request)
• Different type of Mounting Wall, Selling, Panel, "L" Clamping
• 4 Digit Seven Segment LED Display • Seconds, Minutes, Hours Configurable
• Selectable Resolution 0.01 / 0.1 / 1
• 2 Relay Outputs with Selectable Delay Mode
• Front End Reset with Protection
• External Start / hold / Reset Options
• 10 Years Memory Backup )
• Supply Voltage 230V AC

Specification:

• Model: DTJ 71 A (4” DISPLAY) & DTJ 71 B (8”DISPLAY)
• Display: 4 Digit 4” & 8” Red 7 seg LED ( 1” & 2” on request)
• Range: 99.59, 999.9, 9999 secs / mins / hrs (programmable)
• Resolution: 0.01 sec / min / hrs
• External Input: START / HOLD / RESET (potential free contact inputs)
• Relay output: 2 NO, 2 NC 5 A Rated relay
• Power Supply: 230V AC / 50Hz
• Working temperature: 0 – 50°C